欄目名稱
熱點推薦
當前位置:首頁 » 首頁欄目 » 外資注冊 » 外商投資產業指導目錄2015 年修訂-英文版
外商投資產業指導目錄2015 年修訂-英文版
作者:未知 更新時間:2016-7-10 9:15:39 來源:博韻智遠

外商投資產業指導目錄(2015 年修訂)

Catalogue for the Guidance of Foreign Investment Industries

(Amended in 2015)

 

Promulgation Date2015-03-10

Promulgation NumberOrder of the National Development and

Reform Commission and the Ministry of Commerce No.22

Promulgation Department:Development and Reform Commission, Ministry of Commerce

Catalogue for the Guidance of Foreign Investment

Industries (Amended in 2015)

 

Order of the National Development and Reform Commission and the Ministry of

Commerce   No.22

   

The Catalogue for the Guidance of Foreign Investment Industries (Amended in 2015)

which has been approved by the State Council is hereby promulgated for implementation

as of April 10, 2015. The Catalogue for the Guidance of Foreign Investment Industries

(Amended in 2011) promulgated by the National Development and Reform Commission

and the Ministry of Commerce on December 24, 2011 will be repealed simultaneously.

 

Xu Shaoshi, Chairman of the National Development and Reform Commission

Gao Hucheng, Minister of the Ministry of Commerce

 

March 10, 2015

 

Catalogue for the Guidance of Foreign Investment Industries

(Amended in 2015)

Catalogue of Encouraged Foreign Investment Industries

 

I. Farming, Forestry, Animal Husbandry and Fishery Industries

1.Planting, development and production of woody edible oil, ingredient and industrial raw

material

2.Development of planting technology of green and organic vegetables (including edible

fungus and melon-watermelon), dried fruits, teas and production of these products

3.Development and production of new technology of sugar-yielding crops, fruit trees,

forage grass, etc.

4.Production of flowers and plants, and construction and operation of nursery base

5.Planting of rubber, oil palm, sisals and coffee

6.Planting and cultivation of traditional Chinese medicines

7.Reusing in fields and comprehensive utilization of straws and stalks of crop,

development and production of resources of organic fertilizers

8.Breeding of aquatic offspring (except precious quality varieties peculiar to China)

9.Construction and operation of ecological environment protection projects preventing and

treating desertification and soil erosion such as planting trees and grasses, etc.

10. Breeding of aquatic products, cage culture in deep water, large-scale breeding of

aquatic products, breeding and proliferation of eco-ocean products.

II. Mining and Quarrying Industries

11. Prospecting and exploitation of petroleum, natural gas (unconventional oil resources

such as oil shale, oil sand, shale gas and coal bed gas) and utilization of coal-bed

gas(limited to equity joint ventures or contractual joint ventures)

12. Development and application of new technologies that can increase the recovery

factor of crude oil (in the form of engineering service)

13. Development and application of new technologies for prospecting and exploitation of

petroleum, such as geophysical prospecting, well drilling, well-logging and downhole

operation, etc.

 

14. Development and application of new technologies for improving the utilization of

tailings and the comprehensive utilization of recovery technology of the mine ecology

15. Prospecting, exploitation, and beneficiation of scarce mineral resources in China (such

as sylvine and chromite)

III. Manufacturing Industries

(I) Processing Industry of Farm and Sideline Products

16. Development of green pollution-free feeds and additives

17. Aquatic products processing, seashell products cleansing and processing, and

development of health food made from seaweed

18. Processing of vegetables, dried fruits, fowl and livestock products

(II) Food Manufacturing Industry

19. Development and production of food for babies and agedness, as well as health-care

food

20. Development and production of forest food

21. Development of new technologies and production of natural addictive for foodstuff and

natural perfume material

(III) Manufacturing Industry of Wine, Beverages and Refined Tea

22. Development and production of drinks of fruits, vegetables, albumen, tea, coffee and

vegetables

(IV) Textile Industry

23. Production of multi-functional industrial textile characterized by lightness, high tenacity,

high/low-temperature resistance, and chemical and light resistance with the non-weaving,

machine-waving and knitting and the composite technology

24. Dyeing and post dressing of high-grade loomage with advanced energy-saving and

emission reduction technology and equipment

 

25. Processing of special natural fiber products satisfying the requirement of

comprehensive utilization of ecology and resources and environment protection (including

special animal fiber such as cashmere, bamboo fiber, fibrilia, mulberry silk and colored

cotton)

(V) Garments and Apparel Industry

26. Production of clothes with computer integrated manufacturing system

27. Production of functional special clothing

(VI) Leather, Fur, Feather and Its Products and Footwear Industry

28. Cleaning processing of leather and fur

29. Post ornament and processing of leather with new technology

30. Comprehensive utilization of feather waste

(VII) Lumber Processing Industry and Wood, Bamboo, Vine, Palm, Grass Products

Industry

31. Development and production of new technology and products for the comprehensive

utilization of three remainder of forestry, "sub-quality, small wood and fuel wood" and

bamboo in the forest area

(VIII) Manufacturing Industry of Culture, Education, Handicraft, Fine Arts, Sports

and Entertainment Articles

32. Production of high-end carpets, embroidery and drawnwork products

(IX) Petroleum Refining, Coking and Nuclear Fuel Processing Industry

33. Processing of carbolic oil& wash oil and high-end utilization of coal tar pitch (without

modified pitch)

(X) Chemical Raw Material and Products Manufacturing Industry

34. Development and production of new type down-stream products of polyvinyl chloride

and organic silicon

 

35. Production of supporting raw materials for synthetic materials: hydrogen peroxide

propylene oxide-method propylene oxide, NDC and 1,4-CHDM, adipic dinitrile synthesized

through butadiene method with an annual production of 50,000 or more tons and

hexamethylene diamine.

36. Production of synthetic fiber raw materials: nylon 66 saltand 1,3-propylene glycol

37. Production of synthetic rubber: isoprene rubber, polyester rubber, acrylic rubber,

chlorohydrin rubber, and the special rubbers of fluorous rubber and silicon rubber

38. Production of engineering plastics and plastic alloy: non phosgene-method PC with an

annual production of 60,000 or more tons, POM produced through homogeneous

polymerization, polyphenylene sulfide, polyether-ether-ketone, polyimide, polysulfone,

polyethersulfone, PAR, polyphenyl ether& its modified materials, liquid crystal polymeride

and other products.

39. Fine chemistry: new products and technologies of catalyst, commercialization

processing technology of dying (pigment) materials, electric chemicals and papermaking

chemicals, leather chemicals (except N-N DMF), oil additives, surface active agent, water

treatment agent, adhesives,inorfil, inorganic nano materials production, and

deep-processing of pigment diolame

40. Production of environmentally-friendly printing ink, and aromatic hydrocarbon

41. Production of natural perfume material, synthetic perfume and isolate perfume

42. Production of high-performance coating, high solids, solventless coatings, hydrophobic

automotive paint and supporting waterborne resin

43. Production of high-performance fluoro resin, fluorous membrane materials, medical

fluoro midbody, environmentally-friendlyfluorinerefrigeration agent, cleaning agent and

foaming agent

44. Production of fluorine recycling from phosphorus chemical and aluminum smelting

45. Development and production of new technology and products of forestry chemicals

 

46. Development and production of environmentally-friendly inorganic, organic and

biological membrane

47. Development and production of new fertilizers: high-density potash fertilizer,

compound microorganism inoculant, composite microorganism fertilizer, straw and waste

decomposing agent and special-function microorganism agent

48. Development and production of new varieties of effective, safe and

environmentally-friendly pesticides, new formulations, special-purpose midbody and

addition agents as well as development and application of related cleaning technology

(methane-method acetochlor, aqueous phase-method chlorpyrifos technology, glyphosate

recycling chloromethane technology, stereospecific synthesis-method chirality and

stereochemical structure pesticide production and synthetic technique of ethyl chloride)

49. Development and production of biopesticide and bio-control products: microbial

insecticide, microbial fungicide, agricultural antibiotic, insect pheromone, enemy insect

and microbial herbicide

50. Comprehensive utilization and disposal of exhaust gas, discharge liquid and waste

residue

51. Production of organic polymer material: covering film for plane, rare-earth cerium

sulphide red dye, lead-free in electronic packages, serials of special sizing agent by

photoetching for color Plasma Display Panel, small-diameter and large specific surface

area superfine fiber, high precision fuel filter paper, and Li-ion battery membrane,

self-healing materials for surface treatment and superhydrophobic nanostructured coating

(XI) Medical and Pharmaceutical Products Industry

52. Production of new type compound medication or active composition medication

(including bulk drug and preparation)

53. Production of amino acids: tryptophan, histidine, and methionine with fermentation

method

 

54. Development and production of new anti cancer medication, new

cardio-cerebrovascular medication and new nervous system medication

55. Production of new drugs with bio-engineering technology

56. Production of new type bacterin for AIDS, HCV and contraception as well as cervical

carcinoma, malaria and hand-foot-and-mouth disease

57. Exploitation and production of marine drug

58. Drug preparation: production of new formulation using new technologies of

sustained-release, release, targeting and percutaneous absorption

59. Exploitation and production of new type of pharmaceutical adjuvant

60. Production of antibacterial raw material drug for animal use (including antibiotics and

synthetic chemicals)

61. Production of new products of antibacterial drug, insect repellent, pesticide,

anticoccidial drug for animal use and new formulation

62. Exploitation and production of new diagnosis reagent

(XII) Manufacturing Industry of Chemical Fiber

63. Production of hi-tech chemical fiber (except viscose) of differential chemical fiber,

aramid, carbon fiber, polyethylene of high-strength and high-mode, polyphenylene sulfide

(PPS) and so on

64. Production of new style of fiber and non-fiber polyester: PTT, PEN, PCT and PETG

65. Production of biopolymer fiber with new type renewable resources and green

environmentally-friendly technology, including new solution-method Lyocell, regenerated

cellulose fiber with bamboo and fiber as raw materials, PLA, chitosan fiber, PHA and plant

and animal protein fiber

66. Exploitation and production of new type of polyamide(nylon11,nylon1414, nylon46,

long carbon chain nylon and high-temperature-resistantnylon)

67. Production of meridian tyre aramid fiber and tyre cord

 

(XIII) Industry of Rubber and Plastic Products

68. Development and production of new type photo-ecology multi-functional broad width

agricultural film

69. Digestion and recycle of waste plastics

70. Exploitation and production of new technology and new production of soft plastic

package (high barrier, multi-function film and raw material)

(XIV) Non-metal Mineral Products Processing Industry

71. Development and production of energy-saving, environmentally-friendly, waste

recycling, light and strong, high-performance and multi-functional building materials

72. Production of using plastic to replace steel and wood, energy-saving and high-efficient

chemical architecture materials

73. Production of not less than 10,000,000 sq.m. elastomer (per year), plastic changeable

asphaltum waterproof coiled materials, EPDM waterproof coiled materials with width (of

not less than 2 meters) and matched materials, PVC coiled material with width (of not less

than 2 meters), and TPO waterproof coiled materials

74. Development and production of functional glass with new technology: screen

electromagnetic wave glass, micro-electronics glass base plate, penetrating infrared

non-lead glass, electron grade large spec quartz glass products (pipe, plate, crucible and

instrument vessels), optical property high-quality multi-functional windshield glass,

extreme materials and products for information technology (including waveguide-level

high-precise optical fiber pre-fabricating quartz glass sleeve and ceramic baseplate), and

refining and processing of crystal raw materials with high purity of (99.998% or above) and

super-purity of (99.999% or above).

75. Production of film battery conductive glass, solar light-concentration glass and

conductive glass for buildings

76. Production of glass fiber products and special glass fibers: dielectric glass fiber, quartz

glass fiber, high silica glass fiber, strong and flexible glass fiber, ceramic fiber andproducts

 

77. Production of optical fiber and products: coherent fiber bundle and laser medical optic

fiber, super-second generation and third generation microchannel plate, optical fiber

surface plate, image inverter and optical glass cone

78. Standardized refining of ceramic material and production of high-level decorative

materials used for ceramics

79. Production of environmentally-friendly refractory material (without chromizing) used in

furnaces such as cement, electronic glasses, ceramics and porous carbon bricks

80. Production of AIN ceramic base piece, and multiple-hole ceramics

81. Production of inorganic, non-metal materials and products: complex materials, special

kind of ceramics, special kind of airproof materials (including quick oil sealed materials),

special friction materials (including quick friction braking products), special cementation

materials, special type latex materials, water rubber materials and nano materials

82. Production of organic-inorganic composite foam insulation materials

83. Production of high-tech compound materials: sequential fiber increasing

thermoplasticity compound materials and prepreg, colophonycompound material moulding

craftwork assistant materials (endure heat>300), colophony compound material

(including top grade sports articles and light and strong transport tool parts), special

function compound materials and products (including deep water and diving compound

material products and medical and healing use compound material products),

carbon/carbon compound materials, high-performance ceramic compound materials and

products, metal and glass compound materials and products, metallic layeredcompound

materials and products and super-high-pressure compound rubber pipes

(pressure320MPa) and air bus aviation tyres.

84. Production of precise high-performance ceramics materials: carborundum

super-minute powder(purity >99%, average granule diameter <1μm), Si3N4 super-minute

powder(purity >99%, average granule diameter <1μm), high pure and super-minute

alumina powder(purity >99.9%, average granule diameter <0.5μm), low temperature

sintered zirconia (ZrO2) powder (sintered temperature <1350) ,high pure AlN

 

powder(purity >99%, average granule diameter <1μm), rutile TiO2 powder(purity >98.5%),

white char black(granule diameter <100nm), barium titanate (purity >99%, granule

diameter <1μm)

85. Development and production of top grade artificial crystal and crystal film products:

top-grade artificial synthetical crystal (piezo crystal and ultraviolet crystal), super-hard

crystal (cubic boron nitride crystal), high temperature resistant and strong insulation

artificially synthetic insulation crystal (artificially synthetic mica), new type electric-optic

crystal, large power laser crystal and large-sized glittering crystal, and diamond film tools,

super-thin artificial diamond saw piece with thickness of0.3mmor less

86. Deep processing of non-metal mineral products (super-thin comminution, high level

purity, fine production, modification)

87. Production of super high power graphite electrode

88. Production of pearlite mica (granule diameter: 3-150μm)

89. Production of multiple dimension and multiple direction integer weaving fabric and

profile modeling fabric.

90. Using new dry cement kiln to innocuously dispose solid waste

91. Recycling of building waste

92. Comprehensive utilization of industrial byproduct gypsum

93. Development and application of new technology for the comprehensive utilization of

non-metal mining tailings as well as ecological recovery of mining

(XV) Non-Ferrous Metallurgical Smelting and Rolling Processing Industry

94. Production of silicon single crystal with the diameter of more than200mmand polishing

piece

95. Production of high-tech non-ferrous metallurgical materials: compound semiconductor

materials(gallium arsenide, gallium phosphide, indium phosphide, gallium nitride), high

temperature super-conducting materials, memory alloy materials (titanium nickelcopper

 

and iron memory alloy materials) , super minute (nanometer) calcium carbide and super

minute (nanometer) crystal hard ally, super-hard compound materials, noble metal

compound materials, lightmetal compound materials and different material matching,

aluminum foil used for radiator, middle and high pressure cathode capacitance aluminum

foil, special large aluminum alloy materials, aluminum alloy precise model forge product,

electrified railwayoverheadconductor, super-thin copper strip, erosion proof heat

exchanger copper alloy material, high-performance copper nickel, copper and iron alloy

strip, beryllium copper strip, thread, tube and stick process material, high temperature

bearable tungsten filament, magnesium alloy cast, non-lead solder, magnesium alloy and

its applicable products, bubble aluminum,titanium alloy smelting and processing, atomic

energy grade sponge zirconium, tungsten and deep-processing products of molybdenum.

(XVI) Metal Products Industry

96. Development and production of aviation, aerospace, lightened car, automobile and

environmentally-friendly new materials (special-purpose aluminum board, aluminum

magnesium alloy materials, automobile aluminum alloy frame and so on).

97. Development and production oflight metal semi-solid rapid-forming materials.

98. Production and processing (including painting and processing inner and outer surface

of the products) of metal packing products (thickness <0.3mm) used to pack all kinds of

grain, oil and food, fruits, vegetables, beverages, daily chemical products and such

contents

99.Production of section nickel stainless steel products

(XVII) General EquipmentManufacturing

100. Manufacturing of numerically controlled machine tools of high level and key spare

parts: numerically controlled machine tools which exceed quintuple linkage, digital control

coordinate spindle processing center, digital control coordinate grinding machine, digital

control system which exceeds quintuple linkage and servomechanism installations,

high-speed and super-strong knifes for exact digital control manufacturing.

 

101.Manufacturing of multi-station forging forming machine of 1,000 or more tons

102. Manufacturing of equipments for breaking up and smashing retired cars and

post-processing sorting equipment

103. Manufacturing of soft FTL product line

104. Manufacturing of vertical articulated industrial robots, welding robots and welding

equipments thereof

105. Manufacturing of special processing machines: complete sets of laser cutting and

welding equipments, exact processing laser equipments, digital-control and low-speed

wire-cuts, submicron cracker

106. Manufacturing of wheel or crawler crane of 400 or more tons

107. Designing and manufacturing of high pressure plunger pumps of working pressure

35 MPa and engine, designing and manufacturing of low-speed big torque engine of

working pressure35 MPa

108. Manufacturing of electro-hydraulic proportion servo elements of the integral hydraulic

multi-channel valves with the working pressure25MPa

109. Designing and manufacturing of valve terminal, pneumatic solenoid valves of less

than 0.35W and high-frequency electrical control valves of more than 200Hz

110. Designing and manufacturing of static hydrostatic drive device

111. Development and manufacturing of non-contacting gas film seal of pressure of more

than 10MPa, dry gas seal of pressure of more than 10MPa (including experience device)

112. Development and manufacturing of macromolecule material device for automobiles

(rub piece, changed phenol aldehyde plunger, non-metal liquid pressure mother pump and

so on)

113. Manufacturing of car hub bearingof the third and higher generation, NC machine tool

and processing centre bearingof high or mid class, high-speed wire or board rolling mill

 

bearing, high-speed railway bearing, low-noise bearing of vibration of less than Z4, various

bearings at level P4 and P2,bearings of wind power generators, and aviation bearing

114. Manufacturing of high-density, high-precision and shape-complicated powder

metallurgy parts as well as chains for vehicles and engineering machinery

115. Manufacturing of gear transmissions for wind power and high-speed trains,

propeller-controllable gear transmission system for vessels and large-size and heavy-load

gear boxes

116. Production of high temperature resistant and insulation material (with F, H insulation

class), as well as insulation shaped parts

117. Development and manufacturing of accumulator capsule and hydraulic &pneumatic

rubber sealing

118. Manufacturing of high-precision and high-intensity (above 12.9-level), dysmorphism

and combination fasteners

119.Manufacturing of micro precise transmission coupling parts (clutches)

120.Manufacturing of coupling shaft for heavy mill

121.Remanufacturing of mechanical equipment such as machine tools, engineering

machinery and railway locomotive equipment as well as auto parts

122. Manufacturing of digital camera of 10 million pixels or above

123.Manufacturing of office machines: multi-functional integrated office equipment (copy,

print, fax and scanning) and color-printing equipment, color-printing head and

photosensitive drum with high resolution and precision of 2,400dpi and above

124. Manufacturing of motion picture machinery: 2k and 4k digital film projector, digital

movie camera, digital image manufacture and edit equipment

(XVIII)Special Equipment Manufacturing

125.Manufacturing of mine trolley mining, loading and transporting device: mechanical

drive tipper for mine of 200 or more tons, mobile crusherwheeled digger of5,000m3/h or

 

aboveloading machine for mine of 8 m3or aboveelectric driving mining machine of 2,500

kw or above and so on

126. Manufacturing of geophysicalprospecting (excluding measurement of gravity and

magnetic force) and logging equipment: MEME geophone, digital telemetry seismograph,

digital imaging, computerized logging system, horizontal wells, directional wells, drilling rig

equipment and apparatus, MWD logging while drilling

127.Manufacturing of oil exploration, drilling, gathering and transportation equipment:

floating drilling systems and floating production systems which will work in water with

depth of more than 1,500 meters, and supporting equipment for undersea oil production,

collection and transportation

128.Manufacturing of large digging drilling with caliber of 2 or more meters and depth of 30

or more meters, manufacturing of push bench with diameter of 1.2 or more meters,

manufacturing of large complete non-digging pipeline laying device with pulling power of

300 or more tons, and manufacturing of diaphragm wall drilling machine

129.Designing and manufacturing of large soil shifter of 520 hp or above

130.Designing and manufacturing of purge machine of100m3/h or above, digging device

with digging vessel of 1,000 or more tons

131. Designing and manufacturing for construction device ofconcrete diosmosing-proof

wall for flood control dams

132.Manufacturing of machines for underwater mass: soil shifter, loader and digger under

water with depth of not more than 9 meters

133.Manufacturing of devices of road bridge maintaining and automatic testing

134.Manufacturing of devices of road tunnel supervision, winding, disaster control and

rescuing system

135. Designing and manufacturing of maintenance machinery for large-scale construction

of railways, railway lines, bridges and tunnels, testing and monitoring equipments and key

parts

 

136.Manufacturing of (asphalt) shingles equipment, galvanized steel and other metal roof

production equipment

137.Manufacturing of spot spraying polyurethane waterproof thermal insulation system

equipment which could protect environment and conserve energy, technology and

equipment of polyurethane sealant paste preparation, technology and production

equipment of modified silicone sealing paste preparation

138.Designing and manufacturing of high-precision strip mill (with thickness precision of

10 microns)

139.Manufacturing of selecting device for multi-element, fine-powder and hard-selecting

mine

140.Manufacturing of key devices of 1,000,000 or more tons/year of oxene complete

devices: complicated powder making machine of more than 400,000 tons/year, spiral

discharging centrifuge with diagram of 1,000 or more millimeters, and small-flow and

high-lift centrifugal pump

141.Designing and manufacturing of metal product moulds (such as extrusion moulds of

pipe, stick and shape of copper, aluminum, titanium and zirconium)

142.Designing and manufacturing of punching mould of cover elements of automobile

body, large-sized injection molds of fascia and fender-guard, and clamp and testing tools

of automobile and motorcycle

143.Designing and manufacturing of special production equipment for car power battery

144. Designing and manufacturing of precision mold (the precision of punching mould is

more than 0.02 millimeter and that of cavity mould is more than 0.05 millimeter)

145.Designing and manufacturing of non-metal product moulds

146.Manufacturing of beer filling device of 60,000 bottles/h or above, drink mid or high hot

filling device of 50,000 bottles/h, asepticism filling device of 36,000 bottles/h or above

147.Manufacturing of producing technologies and key equipments for aminophenol,

enzyme, food additive and so on

 

148.Manufacturing of complete feed processing equipment of 10tons/h or above and key

parts thereof

149.Manufacturing of light board and box device of 0.75-millimeter high or less

150. Manufacturing of single sheet-fed multi-colored offset printing presses (with the

breadth of 750 or more millimeters, printing speed of 1,6000 or more sheets per hour in

single multi-colored sheet and 1,3000 or more sheets per hour in double multi-colored

sheet)

151.Manufacturing of single roll lithographic printing machine with speed of more than

75,000 pages in folio/h (787×880 millimeters), diprosopia single roll lithographic printing

machine with speed of more than 170,000 pages in folio/h (787×880 millimeters) and the

commercial roll paper offset press with the printing speed of more than 50,000 pages in

folio/h (787x880 millimeters)

152.Manufacturing of multi-colored breadth flexographic press (with the printing breadth of

1,300 or more millimeters and printing speed of 350 or more meters per second), and the

injection digital printing press (for publishing: printing speed of 150 or more meters per

minute and resolution ratio of 600dpi or above; for packaging: printing speed of 30 or more

meters per minute and resolution ratio of 1,000dpi or above; for changeable data: printing

speed of 100 or more meters per minute and resolution of 300dpi or above)

153.Manufacturing of computer mass color pre-coordination systems, mass color remote

handling systems, mass speed following systems, prints quality automatic testing and

following systems, no-axis turning technologies, high-speed automatic splicer with the

speed of 75,000 pieces per hour, paper feeder, and high-speed and automatic remote

handling paper folding machine, automatic overprinting system, cooling device, silanion

putting system, bias-adjusting device and so on

154. Manufacturing of electronic-gun automatic coating machine

155.Deep processing technique and equipment manufacturing of plate glass

156.Manufacturing of complete set of new type of paper (including pulp) making machines

 

157.Manufacturing of equipment with new technique for post ornament and processing of

leather

158.Development and Manufacturing of new agriculture processing and storage

equipment: new equipment for the processing, storage, preservation, classifying, packing,

and drying of food, oil, vegetables, dried fruits and fresh fruits, meat and aqua-products;

agricultural product quality testing equipment; the quality detection equipment of

agricultural products' damage; rheometer; farinograph; ultrafine pulverization equipment;

highly efficient dewatering equipment; 5-grade plus high efficient fruit juice condensation

equipment; equipment for disinfection of powder food in media; aseptic packaging

equipment for semi-solid and solid food; disc-type separation centrifuges

159. Manufacturing of agricultural machinery: agricultural facility (greenhouse automatic

irrigation equipment, auto-control configuration and fertilization equipment of nutritious

liquid, efficient vegetable nursery equipment, soil nutrient analysis instruments), tractor

and associated farm tools with 120 kilowatts and above matching engine power, low fuel

consumption, low noise and low-emission diesel engine, spray machines with residual fog

tablets recovery unit matching with large tractor, high-performance rice transplanter,

cotton harvesting machine& platform, self-moving maize reaping machine adapting to a

variety of row-spacing (hydraulicor mechanical drive), peanut harvesting machine,

rapeseed harvesting machine, cane cutting machine and complete beet harvester

160. Manufacturing of new technical forestry equipment

161.Manufacturing of equipment for collecting, bundling and comprehensive utilization of

crop straw

162.Manufacturing of equipment for resource utilization of waste agriculture products and

waste fowl and livestock products which are bred in scale

163.Manufacturing of fertilizer, pesticide, water-saving agricultural technical equipment

164.Manufacturing of cleaning equipment for electromechanical wells and equipments for

laundering drug production

 

165.Manufacturing of electronic endoscopes

166. Manufacturing of fundus cameras

167.Manufacturing of key components of medical imaging equipments (high magnetic field

intensity and superconducting magnetic resonance imaging equipment, X-ray digital

tomography imaging equipment, and digital color ultrasonic diagnostic equipment)

168.Manufacturing of Medical Ultrasonic Transducer (3D)

169.Manufacturing of boron neutron capture therapy equipments

170.Manufacturing of image-guiding intensity-modulated radiation treatment system

171.Manufacturing of Hemodialysis, Blood Filter

172. Manufacturing of full-automatic biochemical monitoring equipment, blood cells

analyzer with five classifications, full-automaticchemiluminescence immune analyzer and

high-throughputDNA sequencing system

173.New techniques of quality control of medicine products and new equipment

manufacturing

174.New analytical techniques and extraction technologies, and equipment development

and manufacturing for the effective parts of national medicines

175.Manufacturing of multi-layer co-extrusion water-cooled film mold-blowing equipment

for non-PVC infusion bags for medical use

176.Development and Manufacturing of equipment of new type of knitting machines, key

parts and textile testing, laboratory equipment

177.Manufacturing of computer Jacquard artificial fur machine

178.Manufacturing of special equipments for solar cell production

179.Manufacturing of equipment for prevention and treatment of air pollution: equipment

for high temperature-resistant and corrosion-resistant filter materials, low NOx combustion

equipment, complete equipment for fuel gas denitrification catalysts and denitrification,

 

equipment for industrial organic waste gas purification, equipment for diesel vehicle

ventilation purification, and equipment for exhaust treatment of heavy metal

180. Manufacturing of equipment for prevention and treatment of water pollution:

horizontal spiral centrifugal machine, film and film materials, ozone generator of50kg/h or

above, chlorine dioxide generator of10kg/h or above, ultraviolet disinfection device, small

sewage treatment equipment in the rural areas, and treatment equipment for waste water

with heavy metal

181.Manufacturing of equipment for treatment of solid waste: equipment for sludge

treatment and resource utilization at the sewage treatment plant, complete equipment for

waste incineration with daily treatment of more than 500 tons, technical equipment for

landfill leachate treatment, leakage-proof geomembrane at the landfill field, equipment for

construction waste and resource utilization, equipment for dangerous waste treatment,

methane gas power generation device at the landfill field, equipment for treatment of iron

and steel scrap, and equipment for polluted soil remediation

182.Development and manufacturing of equipment for comprehensive utilization of red

mud in the aluminum industry

183.Manufacturing of equipment of comprehensive utilization of tailings

184.Manufacturing of waste plastics, electronics, rubber, battery recycling equipments

185.Manufacturing of equipment for recycling treatment of waste textiles

186.Manufacturing of the remanufacturing equipment of used mechanical and electronic

products

187.Manufacturing of equipment for comprehensive utilization of scrap tires

188.Environmental protection technology and equipment manufacturing of aquatic

ecosystem

189.Manufacturing of movable combination water purification equipment

190.Unconventional water treatment and repeated utilization equipment, and water quality

monitoring instrument

 

191.Leak-testing equipment and instrument of industrial water pipe network and device

(apparatus)

192.Development and manufacturing of 100,000 cubic meters and above daily production

seawater desalination and recycling cooling technology and complete sets of equipments

193.Manufacturing of special meteorological observation and analysis equipments

194.Development of seismic station, seismic network, and mobile seismological

observation technology system, and manufacturing of equipments

195. Manufacturing of four-drum (and above) radial tire building machines

196.Manufacturing of rolling resistance testing machine and tire noise lab

197.Manufacturing of new heating measurement and temperature control device technical

equipments

198.Manufacturing of preparation, storage and transportation equipment and inspection

systems of hydrogen energy

199.Manufacturing of new heavy residue gasification atomization nozzle, steam leakage

rate of 0.5 percent and below efficient steam traps, 1,000 °C and above high-temperature

ceramic heat exchanger manufacturer

200.Manufacturing of equipment for marine oil-spilling recovery

201.Manufacturing of low-density coal gas and ventilation air utilization device

202.Development and utilization of clean-coal technical product and equipment

manufacturing (coal gasification, coal liquefaction, water-coal, industrial briquette)

203.Technical development and equipment manufacture for fire-fighting and rescue of

large public buildings, high-rise buildings, petrochemical facilities, forest, hill, water area

and underground facilities

(XIX) Automobile Manufacturing

204.Manufacturing of automobile engine, and construction of engine research and

development organization: gasoline motor with output per liter not lower than 70 kw, diesel

 

motor with output per liter not lower than 50 kw and discharge capacity below 3 liters,

diesel motor with output per liter not lower than 40 kw and discharge capacity above 3

liters, motor driven by such new resources as fuel cells and compound fuel

205.Manufacturing of key auto parts and development of key technology: DCT, CVT, AMT,

gasoline engine turbocharger, viscous even shaft device (for four-wheel drive), automatic

transmission actuator (magnetic valve), hydrodynamic retarder, eddy current brake, gas

generator for SRS, common rail fuel injection technology (with maximum injection

pressure of more than 2,000pa), VGT, VNT, engine emission control device up to the

standard for the V stage of China, ITM and coupler assembly, steer-by-wire system, diesel

particles trap, special vehicle bridge for large low-floor passenger cars, absorption steering

system, large-and-medium frequency air condition system for passenger cars, special

rubber parts for vehicles, as well as key parts and components of the above-mentioned

parts

206.Production as well as research and development of automobile electronic devices:

engine and under-chassis control system as well as key spare parts, in-vehicle electronic

technology (automobile communication system and navigation system)automobile

electronic network technology (limited to equity joint ventures)components for the input

(sensor and sampling system) and the output (actuator) of electronic control system, EPS

electronic controller (limited to equity joint ventures), embedded electronic integration

system, electronic-controlled air suspension, ECS, electronic valve system equipment

EIC, ABS/TCS/ESP system, BBW, TCU, TPMS, OBD, IMMO, ABICAS, and testing

system for testing and maintenance of autos and motorbikes

207.Manufacturing of key parts and components for new energy vehicles: energy power

battery (energy density of 110Wh/kg or above, cycle life of 2,000 or more times, and

foreign investment proportion of not more than 50%), positive materials of battery (specific

capacity of 150mAh/g or above, cycle life of 2,000 times which is not less than 80% of the

initial discharging capacity), battery separator (with thickness of15-40μm and porosity of

40%-60%); battery management system, motor management system, electronic

integration of electric cars; drive motor for electric cars (peak power density of 2.5kW/kg or

 

above, high efficient area: 65%, and working efficiency of 80% or above), DC/DC for

vehicles (input voltage of 100V-400V),high power electronics (IGBT, voltage level of 600V

or above and current of300Aor above); and plug-in hybrid electromechanical coupling

drive system

(XX) Manufacturing Industry of Railroads, Ships, Aerospace and Other

Transportation Equipment

208. Manufacturing of engine emission control device of high-emission (with emission of

more than 250 ml) motorcycles meeting motorcycle pollutant discharging criteria (stage III)

of China.

209. Equipment for railway transportation (limited to equity joint ventures or contractual

joint ventures)

210. Design, manufacturing and maintaining of civil plane: those of trunk and branch lines

(Chinese part shall hold the majority of shares)general ones (limited to equity joint

ventures or contractual joint ventures)

211. Production and maintaining of spares parts for civil planes

212. Designing and manufacturing of civil helicopters (for those of 3 or more tons, the

Chinese part shall hold the majority of shares)

213. Production of spares parts for civil helicopters

214. Manufacturing of ground and water effect plane, and designing and manufacturing of

no-people plane and aerostat (Chinese part shall hold the majority of shares)

215. Design, manufacturing and maintaining of plan engines and spare parts as well as air

assistant power systems

216. Designing and manufacturing of civil air-borne equipment

217. Manufacturing of flight ground equipments: civil airfield facilities, support equipment

for civil airfield work, ground equipment for flight test, equipment for flight simulation and

practice, equipment for aeronautic testing and measuring, equipment for aeronautic

ground testing, comprehensive testing equipment for machines, special equipment for

 

aeronautic manufacturing, equipment for pilot manufacturing aeronautic materials, ground

receiving and applying equipment for civil aircraft, ground testing equipment for rocket

launcher, equipment for dynamic and environmental experience for rocket launcher

218. Manufacturing of mechanical and electrical products for aircrafts, temperature control

products for aircrafts, test equipment for planet products and structure and organization

products for aircrafts

219. Manufacturing of light gas-turbine engine

220. Designing of luxury cruise and deep-water (more than 3,000 meters deep) marine

engineering equipment of luxury cruise

221. Manufacturing and maintenance of marine engineering equipment (including

modules) (Chinese part shall hold the majority of shares)

222. Designing of low-and-medium-speed diesels and their parts for vessels

223. Manufacturing of crankshafts of low and mid speed for diesel engine for vessels

(Chinese part shall hold the majority of shares)

224. Designing and manufacturing of stateroom machine for vessels

225. Designing and manufacturing of communication and directing systems for vessels:

communication systems, electronic directing equipment, vessel radar, electric compass

automatic pilot, public broadcasting systems inside vessels and so on

226. Designing and manufacturing of cabin cruiser

(XXI) Electric Machinery and Equipment Industries

227. Manufacturing of pivotal equipment of super-critical units of over 1,000,000KW of fire

and electricity set: safety valve and adjustment valve

228. Manufacturing of the denitration technical equipment for sintering machine at the

coal-burning power plant and the steel industry

229. Designing and manufacturing of equipment of fire-electricity airproof

 

230. Manufacturing of heavy casting and forging equipment for coal-burning power plant

and hydroelectric power station

231. Manufacturing of key auxiliary equipment for hydro-power generating units

232. Manufacturing of power transmitting and transforming equipment

233. Manufacturing of new energy electricity-power complete equipment or key equipment:

photovoltaic power, geothermal power generation, tidal power generation, wave power

generation, rubbish power generation, methane power generation, wind power generation

equipment of over 2.5MW

234. Manufacturing of large pumped-storage aggregate with the nominal power of 350MW

or above: pump turbine and speed controller, large speed-variable reversible pump

turbines, generator motor and such accessory equipment as excitation and starting device

235. Manufacturing of Stirling generating set

236. Development and manufacturing of straight linear and planar motor and drive system

237. Manufacturing of hi-tech green battery: lithium battery power, zinc nickel storage

battery, zinc-silver accumulator, lithium ion battery, solar battery, fuel cell and so on

(except energy power battery for new energy vehicles)

238. Manufacturing of refrigeration air conditioning compressor with motor adopting DC

variable frequency technology, refrigeration air conditioning compressor adopting

CO2 natural medium and refrigeration air conditioning equipment with renewable energy

(air, water and ground source)

239. Manufacturing of solar air conditioning, heating system, solar dryer

240. Manufacturing of biomass drying pyrolysis system, biomass, gasification unit

241. Manufacturing of ac-fm voltage regulation drawbar

(XXII) Computer, Communication and Other Electronic Equipment Manufacturing

242. Manufacturing of Hd camcorders and digital sound-playing equipment

 

243. Manufacturing of flat panel display such as TFT-LCD, PDP and OLED and the

material of flat panel display (except TFT-LCD glass base plate of the sixth-generation or

below)

244. Manufacturing of such parts as optical engine, light source, projection screen,

high-resolution projection tube and LCOS module used in large screen color projection

display

245. Manufacturing of digital audio and visual coding or decoding equipment, digital

broadcasting TV studio equipment, digital cable TV system equipment, digital audio

broadcast transmission equipment, digital television converter, digital television

broadcasting Single Frequency Network (SFN), and satellite digital TV up-linking station

246. Designing of integrated circuit, and large-scale manufacturing of digital integrated

circuit with its wire width of not more than 28 nanometer, manufacturing of simulated and

digital analogy integrated circuit of not more than 0.11 micron and the encapsulation,

manufacturing of MEMS and compound semiconductor integrated circuit as well as

advanced packaging technologies (such as BGA, PGA, CSP, MCM) and test)

247. Manufacturing of large and medium-sized computer, high-performance K computer,

portable micro computer, large-scale simulated system, large industrial control

machineand the controller

248. Manufacturing of computer digital signal process system and board card

249. Manufacturing of figure and image recognition process system

250. Development and manufacturing of large-capability optical and disk driver

251. Manufacturing of high-speed storage system and intelligent storage equipment with

its capability of not less than 100 TB

252. Manufacturing of computer aided design (three-dimensional CAD), electronic design

automation (EDA),computer assisted testing (CAT), computer aided manufacture (CAM),

computer aided engineering (CAE) and other computer application systems

253. Development and manufacturing of software product

 

254. Development and manufacturing of specialized electronic material (except the

development and manufacturing of optical fiber perform rod)

255. Manufacturing of specialized equipment, testing equipment, tools and moulds

256. Manufacturing of new type electronic components and parts:slice components,

sensitive components and sensors, frequency monitoring and selecting components, mix

integrated circuit, electrical and electronic components, photoelectric components, new

type components for machinery and electronics, polymer solid electrolytic capacitor,

super-capacitors, integrated passive components, high-density interlinked build-up board,

multilayer flexible board, flexible printing circuit board and packaging substrate

257. Manufacturing of touch-control system (touch screen and touch components)

258. Manufacturing of high-brightness LEDwith its luminous efficiency of more than

140lm/W, epitaxial slice LED(blue) with its luminous efficiency of more than 140lm/W, and

white luminous tube with luminous efficiency of more than 140lm/W and its power of more

than 200mW

259. Development and manufacturing of key components and parts used in high-precision

digital CD drive

260. Manufacturing of recordable compact disk

261. Design and manufacturing of civil satellites, manufacturing of civil satellites effective

payload (Chinese partner shall hold the majority of shares)

262. Manufacturing of spare parts for civil satellites

263. Manufacturing of telecommunication system equipment for satellites

264. Manufacturing of optical communication measuring instrument and light transceiver

with its speed of not less than 40Gb/s

265. Ultra Broad Band (UWB) communication equipment manufacture

266. Manufacturing of wireless Local Area Network (including supporting WAPI) and Wide

Area Network

 

267. Manufacturing of TDM of 100Gbps or above, DWDM, broad band passive network

equipment (including EPON, GPON and WDM-PON), next generation DSL chip and

equipment, OXC, ASON, and optical fiber transmission equipment of 40G/sSDH or above

268. Development and manufacturing of system equipment, terminal equipment, test

equipment, software and chips on the basis of the next-generation internet equipment of

IPv6

269. Development and manufacturing of the third-generation and following-up mobile

communication cell phones, base station, core network equipment and network testing

equipment

270. Development and manufacturing of high-end router, and network switcher of more

than 1 kilomega

271. Manufacturing of air traffic control system equipment

272. Development and manufacturing of electronic auxiliary teaching equipment of

traditional Chinese medicine based on computer information technology (involving sound,

light, electronics and touch), and equipment of virtual pathological and physical model.

(XXIII) Machinery Industries for Instrument and Meter

273. Manufacturing of automatic control system and device in the industrial process: FCS,

PLC, two phase flow meter, solid flow meter, new sensors and field measurement

instrument

274. Development and manufacturing of large-scale sophisticated instruments

275. Manufacturing of high-precision digital voltmeter, current meter (with measuring

range of seven bit and a half and above)

276. Wattless power manufacturing of automatic compensation equipment

277. Manufacturing of new equipment for safe production

278. VXI bus-type automatic test system (in accordance with IEEE1155 international

standards)

 

279. Development and manufacture comprehensive management system for under-mine

monitoring and disaster-forecasting apparatus and coal safety measurement

280. Manufacturing of the equipment for engineering measurement and global

geographical observation equipment

281. Manufacturing of environment motoring apparatus

282. Manufacturing of instrument and equipment for hydrological data collecting,

processing, transmitting and flood warning

283. Manufacturing of ocean exploring apparatus and equipment

(XXIV) Industry of Comprehensive Utilization of Waste Resources

284. Coal ore dressing by washing and comprehensive utilization of powered coal

(including desulphurized plaster), coal gangue

285. Production of all biodegradable material

286. Recovery processing of waste electrical and electronic products, autos,

electromechanical devices, rubber, metal and batteries

IV. Production and Supply of Power, Heating Power, Gas and Water

287. Construction and operation of power station with stand-alone 600,000 kilowatts and

above supercritical unit

288. Construction and operation of power station by employing back pressure (extraction

type) combined heat - power generation, combined heating-power-coolinggeneration, and

300,000 kilowatts and above cogeneration unit

289. Construction and operation of power station with stand-alone 600,000 kilowatts and

above large air cooling unit in water-deficient area

290. Construction and operation of clean coal power generation project such as integral

gasification combined circulation power generation

 

291. Construction and operation of power generating project of stand-alone 300,000

kilowatts and above by employing fluidized bed boiler and using coal gangue, middings

and coal slime

292. Construction and management of hydropower stations with the main purpose of

power generating

293. Construction and management of nuclear-power plants (Chinese partner shall hold

the majority of shares)

294. Construction and management of new energy power plants (including solar energy,

wind energy, magnetic energy, geothermal energy, tide energy and biological mass

energy, etc.)

295. Construction and management of power grid (the Chinese part shall hold the majority

of shares)

296. Utilization of sea water (direct use of sea water, and seawater desalinization)

297. Construction and operation of urban water-supply plant

298. Construction and operation of renewable water plant

299. Construction and operation of sewage treatment plant

300. Construction and operation of charging stations of motor vehicles and battery

replacement stations

V. Communication and Transportation, Storage, Post and Telecommunication

Services

301. Construction and management of grid of national trunk railways (Chinese partner

shall hold the majority of shares)

302. Construction and management of intercity railway, urban (rural) railway,

resource-based development railway, and branch railways and related bridges, tunnels,

ferry andstation facilities

 

303. Comprehensive maintenance of infrastructure of high-speed railway, special railway

line, intercity railway

304. Construction and management of highways, independent bridges and tunnels

305. Road freight transportation companies

306. Construction and management of public dock facilities of ports

307. Construction and management of civil airports (Chinese partner shall hold the relative

majority of shares)

308. Air transportation companies (Chinese partner shall hold the majority of shares, and

investment proportion of a foreign company and its affiliated enterprises should not be

more than 25%)

309. General aviation companies for agriculture, forest and fishery (limited to equity joint

ventures or contractual joint ventures)

310. Scheduled and non-scheduled international maritime transportation business(limited

to equity joint ventures or contractual joint ventures)

311. International containers inter-model transportation

312. Construction and management of oil (gas) pipelines, oil (gas) depots and petroleum

wharf

313. Construction and management of the facilities of coal delivery pipelines

314. Construction and management of automatic elevated three-dimensional storage

facilities and storage facilities relating to packaging, processing and distribution business

VI. Wholesale and Retail Trade Industry

315. Joint distribution of general goods, logistics and related technical services such as

low-temperature distribution of fresh agricultural productsand special drugs

316. Chain distribution in rural areas

317. Construction and operation of stock and container unit sharing system

 

VII. Rent and Business Service

318. Accounting and auditing (chief partner needs to have Chinese nationality)

319. Information consulting service of international economy, science and technology,

environmental protection and logistics

320. Engaged in such information technology and business flow outsourcing services as

system application management and maintenance, information technology supportive

management, bank background service, financial settlement, software development,

offshore call center, data processing by means of accepting service outsourcing

321. Venture investment enterprises

322. Intellectual property services

323. Domestic service

VIII. Scientific Research and Technical Services

324. Biological engineering and bio-medical engineering technique and development

technique of biomass energy

325. Isotope, irradiation and laser technique

326. Sea development and sea energy development technology, comprehensive

technology of sea chemical resources, development of the relevant products and

deep-processing technology, sea medicine and biochemical product development

technology

327. Marine monitoring technology (sea tidal wave, meteorology, environmental

monitoring), sea bed probing, exploration and evaluation technology of ocean resource

328. Comprehensive use of high additional value technology of seawater chemical

resources to distill potassium, bromine, magnesium and lithium from dense sea water after

desalinization and its deep processing

329. Technology of marine oil pollution clearing and ecological restoration, and

development of related products, prevention and treatment technology of eutrophication of

 

sea water, prevention and treatment technology of marine biological explosive growth

disasters, and restoration technology of ecological environmental in the coastal zone

330. Development and service of energy-saving technology

331. Technology for recycling and comprehensive utilization of resource, development and

application of the recycling technology of the waste dispelled by enterprises

332. Technology for environment pollution treatment and monitoring

333. Energy-saving and consumption-reduction in chemical fiber production and printing

and dyeing and the new technology to deal with polluted air, water and solid waste

334. Technology for preventing from desertification and desert improvement

335. Comprehensive management technology for balancing grass and domestic animal

336. Application technique of civil satellite

337. Research and development centers

338. Incubator for hi-tech, new products developing, and incubation of enterprises

339. Development and application of Internet technology

340. Creative industries like industrial design, architecture design and costume design

IX. Water, Environment and Public Facility Management Industry

341. Construction and management of key water control projects for comprehensive

utilization (Chinese partner shall hold the relative majority of shares)

342. Construction and management of urban access-controlled roads

343. Construction and management of metro and city light rail

344. Construction and management of treatment plants for garbage, the dangerous

wastes (incineration and landfill), and the facilities of environment pollution treatment

X. Education

345. Vocational training institutions for non-educational system class

XI. Public Health and Social Work

 

346. Service agencies for the elderly, the handicapped and children

347. Retirement organization

XII. Culture, Sports and Entertainment

348. Operation of the performance site

349. Operation of sports facilities, fitness, competition performance, sports training and

agency service

Catalogue of Restricted Foreign Investment Industries

I. Farming, Forestry, Animal Husbandry and Fishery Industries

1. Breeding and seeds developing production of new train crop breed (Chinese party shall

hold the majority of shares)

II. Mining Industries

2. Exploring and mining of special and scarce coals (Chinese partner shall hold the

majority of shares)

3. Exploring and mining of precious metals (gold, silver, platinum families)

4. Exploring and mining of plumbago

5. Exploring and cradling of lithium

III. Manufacturing Industries

6. Processing of edible oil of soybean, rapeseed, peanut, cottonseed, tea seed, sunflower

seed and palm (Chinese partner shall hold the majority of shares), processing of rice, flour

and raw sugar and deep-processing of corn

7. Manufacturing of biology liquid fuel (fuel ethanol and bio-diesel) (Chinese partner shall

hold the majority of shares)

8. Print of publication (Chinese partner shall hold the majority of shares)

 

9. Non-ferrous metal refining of tungsten, molybdenum, stannum (except tin compounds),

antimony (including antimony oxide and antimony sulphide)

10.Smelting and separation of rare earth metal (limited to equity joint ventures or

contractual joint ventures)

11. Manufacturing of auto vehicle, special vehicle and motorcycle: shares of Chinese

partner is no less than 50% and the same foreign company can set up less than two

(including two) joint ventures manufacturing the same kinds of vehicles (passenger cars,

commercial vehicles, motorcycles) in China. If joint acquisition of other domestic

automobile production enterprises is done with the Chinese partner, the foreign company

cannot be restricted by the conditions mentioned above.

12. Repairing, designing and manufacturing of ship (including subsection) (Chinese

partner shall hold the majority of shares)

13. Production of satellite television receivers and key parts

IV. Production and Supply of Power, Heating Power, Gas and Water

14. Construction and management of conventional coal-fired power of condensing steam

plants whose unit installed capacity is 300,000kW or below, and coal-fired power of

condensing-extracted steam plants with dual use unit cogeneration whose unit capacity is

100,000kW within the small power grid

15. Construction and management of urban gas, heating power and water supply and

drainage pipe network with a population of 500,000 or more (Chinese partner shall hold

the majority of shares)

V. Communication and Transportation, Storage, Post and Telecommunication

Services

16. Railway passenger transportation companies (Chinese partner shall hold the majority

of shares)

17. Corporate of highway passenger transport

18. Corporate of water transportation (Chinese partner shall hold the majority of shares)

 

19. General aviation companies engaging in business flying, air travel, photographing,

prospecting and industry (Chinese partner shall hold the majority of shares)

VI. Information Transmission, Software and Information Technology Services

20. Tele communication companies: telecommunication increment service (the foreign

capital shall not exceed 50 percent, except for electronic commerce), basic telecom

business (the foreign capital shall not exceed 49 percent)

VII. Wholesale and Retail Trade Industries

21. Purchase of grain, wholesale of grain and cotton, and construction and operation of

large wholesale market of agricultural products

22. Ship agent (Chinese should hold the majority of shares), tally for foreign vessels

(limited to equity joint ventures or contractual joint ventures)

23. Construction and operation of gasoline stations (Chinese should hold the majority of

shares of the multiple shops which have more than 30 branch stores and sale different

kinds and brands of commodities from multi-suppliers)

VIII. Banking and Insurance Industries

24. Bank (shares of a single overseas financial institution and related parties under its

control or joint control as the originator or strategic investors shall not exceed 20% in a

single Chinese commercial banks; total share of multiple overseas financial institutions

and related parties under its control or joint control as the originator or strategic investors

shall not exceed 25%; overseas financial institutions investing in the rural small and

medium-sized financial institutions must be banks)

25. Insurance companies (the share of life-insurance companies shall not exceed 50%)

26. Security companies (only engaged in underwriting, recommendation and guarantee of

RMB common stock, capital stocks, government bonds and corporate bonds as set up,

brokerage of foreign share and brokerage and proprietary of government bonds and

corporate bonds; after development of two years, qualified companies can apply to expand

 

the business scope; the foreign capital shall not exceed 49%); in security investment fund

management companies, the foreign capital shall not exceed 49%.

27. Futures companies (Chinese should hold the majority of shares)

IX. Leasing and Commercial Service Industry

28. Market research (limited to equity joint ventures or contractual joint ventures; Chinese

partner shall hold the majority of shares during ratings survey of radio and television)

29. Status enquiry and grade service companies

X. Scientific Research and technical Services Industries

30. Mapping companies (Chinese partner shall hold the majority of shares)

XI. Education

31. Higher educational institution (limited to contractual joint ventures and leaded by

Chinese partner*)

32. Common high school education institutions (limited to contractual joint ventures, and

leaded by Chinese partner)

33. Preschool education institutions (limited to contractual joint ventures, and leaded by

Chinese partner)

XII. Public Health and Social Work

34. Medical Institutions (limited to equity joint ventures or contractual joint ventures)

XIII. Culture, Sports and Entertainment Industries

35. Production and publication of broadcasting and TV programs and film-making (limited

to contractual joint ventures)

36. Construction and operation of cinemas (Chinese partner shall hold the majority of

shares)

37. Construction and operation of large theme park

 

38. Brokering agency of stage performances (Chinese partner shall hold the majority of

shares)

XIV. Other industries restricted by the State or international treaties that China has

concluded or taken part in

Catalogue of Prohibited Foreign Investment Industries

I. Farming, Forestry, Animal Husbandry and Fishery Industries

1. Research, development, cultivation and growth of China's rare and unique precious

breeds, and production of related propagating materials (including tine genes in plants

industry, husbandry and aquatic products industry)

2. Breeding of transgenic varieties of crops, livestock, poultry and aquatic fingerlings and

production of transgenic seeds (seedling)

3. Fishing in the sea area under the jurisdiction of China and in in-land water of China.

II. Mining and Quarrying Industries

4. Exploring and mining of tungsten, molybdenum, tin, antimony, fluorite

5. Exploring, mining and dressing of rare earth metal

6. Exploring, mining and dressing of radioactive mineral products

III. Manufacturing Industry

(I) Medical and Pharmaceutical Products Industry

7. Processing of traditional Chinese medicines that have been listed as the Regulations on

Conservation and Management of Wild Chinese Medicinal Material Resources and Rare

and Endangered Plants in China

 

8. Application of preparing technique of traditional Chinese medicines in small pieces

ready for decoction, like steam, frying, moxibustion, calcining, and production of the

products of secret recipe of traditional Chinese patent medicines

(II) Processing Industry of Petroleum, Coking and Nuclear Fuel

9. Smelting and processing of radioactive mineral products and production of nuclear fuel

(III) Special Equipment Manufacture Industry

10. Manufacturing of Weapons and Ammunition

(IV) Other Manufacturing Industries

11. Ivory carving

12. Tiger-hone processing

13. Production of Xuan-paper (rice paper) and ingot-shaped tablets of Chinese ink

IV. Production and Supply of Power, Heating Power, Gas and Water

14. Construction and management of conventional coal-fired power of condensing steam

plants whose unit capacity is not more than 300,000kW, within the large power grid, and

the coal-fired power of condensing-extraction steam plants with dual use unit cogeneration

with unit capacity of not more than 200,000KW

V. Communication and Transportation, Storage. Post and Telecommunication

Services

15. Air traffic control

16. Companies of postal services, and domestic express delivery of letters

VI. Wholesale and Retail Trade

17. Wholesale and retail of tobacco leaf, cigarette and redried leaf tobacco, and other

tobacco products

VII. Leasing and Commercial Service Industry

18. Social investigation

 

19. China legal affairs consulting (except for provision of information about environmental

impact of Chinese law)

VIII. Scientific Research and Technical Services Industries

20. Development and application of human stem cells and gene diagnosis therapy

technology

21. Geodetic survey, marine charting, aerial photography for mapping, administrative

mapping, relief map, the world administrative map, the national administrative map,

administrative map of the provincial level and below, national teaching map, compilation of

local teaching map and three-dimensional map; compilation of navigation electronic map;

surveys relating to regional geological mapping, mineral geology, physical geography,

geochemistry, hydrogeololgy, environmental geology, geological disaster and remote

sensing geology

IX. Irrigation, Environment and Public Utilities Management

22. Construction and management of nature reserve and international signify marshy

23. Development of resources about wild animals and plants be native to domestic

protected by nation

X. Education

24. Institution of compulsory education and special education, like military, policeman,

politics and party school

XI. Art, Sports and Entertainment Industries

25. News agencies

26.Publication of books, newspaper and periodical

27.Publication and production of audio and visual products and electronic publications

28. Radio stations, TV stations, radio and TV transmission networks at various levels

(transmission stations, relaying stations, radio and TV satellites, satellite up-linking

 

stations, satellite receiving stations, microwave stations, monitoring stations, cable

broadcasting and TV transmission networks)

29. Companies of publishing and playing of broadcast and TV programs

30. Companies of films making, issuing, business

31. News website, network audiovisual service, Internet service location, internet art

management (except music)

32. Auction companies and antique shops engaging in antique auction

33. Construction of golf course and villa

XII. Other Industries

34. Projects that endanger the safety and performance of military facilities

35. Gambling industry (including gambling turf)

36. Eroticism

XIII. Other industries restricted by national laws and regulations or international

treaties that China has concluded or taken part in

Notes: CEPA agreement between the Mainland and Hong Kong and supplemental

agreement, CEPA agreement between the Mainland and Macao and supplemental

agreement, Cross-strait Economic Cooperation Framework Agreement and supplemental

agreement, free trade agreement signed by China and other related countries and

investment agreement shall prevail if there are any separate regulations.

*           Domination by Chinese partner means the principal or the principal administrator shall have

Chinese nationality, and the Chinese members in the board of trustees, the board of directors

or the joint management committee of Chinese-foreign cooperative schools shall not be less

than 1/2 (similarly hereinafter).

 

透明背景.png


急速赛车装扮